- Log in as superuser and edit the /etc/rc.config.d/netconf file.
The file contents will resemble the following:
INTERFACE_NAME[0]=<device name>
IP_ADDRESS[0]=<IP address>
SUBNET_MASK[0]=
BROADCAST_ADDRESS[0]=""
LANCONFIG_ARGS[0]="ether"
DHCP_ENABLE[0]=0
|
For each alternate IP address your organization will use for Web Access Management multiple IP routing, the file must include each of the above lines. For example:
INTERFACE_NAME[0]=lan0
INTERFACE_NAME[1]=lan0
INTERFACE_NAME[2]=lan0
IP_ADDRESS[0]=12.34.56.71
IP_ADDRESS[1]=12.34.56.72
IP_ADDRESS[2]=12.34.56.73
SUBNET_MASK[0]=255.255.255.0
SUBNET_MASK[1]=255.255.255.0
SUBNET_MASK[2]=255.255.255.0
BROADCAST_ADDRESS[0]=""
BROADCAST_ADDRESS[1]=""
BROADCAST_ADDRESS[2]=""
LANCONFIG_ARGS[0]="ether"
LANCONFIG_ARGS[1]="ether"
LANCONFIG_ARGS[2]="ether"
DHCP_ENABLE[0]=0
DHCP_ENABLE[1]=0
DHCP_ENABLE[2]=0
|
- Save and quit the file.
- Run ifconfig <device> :1 <IP address> on the command line. For example:
ifconfig hme0:1 12.34.56.71
To test the setup, telnet to each IP address entered in the /etc/rc.config.d/netconf file.
|
